NOLANSE

Hydruliac Prduct Series

Love and dedication, high quality service

High-Quality-Low-Price-ISO-Standard-Hydraulic
High-Quality-Low-Price-ISO-Standard-Hydraulic4
High-Quality-Low-Price-ISO-Standard-Hydraulic3
High-Quality-Low-Price-ISO-Standard-Hydraulic2
High-Quality-Low-Price-ISO-Standard-Hydraulic1

High Quality Low Price ISO Standard Hydraulic Cylinders

We have professional quality control department,the inspection of every step from raw material to finished product is made  in the same factory,each procedure will be tested by professional inspector.
Before hydraulic cylinder is assemblied , every spare parts would be measured and cleaned .After hydraulic cylinder is assemblied , pressure test would be carried out one by one.
We ensure the testing pressure is 30%-50% higher than rated pressure in almost one hour's test.

 High Quality Low Price ISO Standard Hydraulic Cylinders

High Quality Low Price ISO Standard Hydraulic Cylinders

Product Description

 

High Quality Low Price ISO Standard Hydraulic CylindersHigh Quality Low Price ISO Standard Hydraulic CylindersHigh Quality Low Price ISO Standard Hydraulic Cylinders

High Quality Low Price ISO Standard Hydraulic Cylinders

1. Working pressure: 7Mpa-35Mpa; 
2. Bore: 14-800mm; 
3. Stroke: <=15000mm; 
4. Mainly used for engineering equipment, agricultural vehicle.

 

Usages and features:

1. Pressure: This standard cylinder had two kinds of pressure levels for E and G. 

E-class applied to pressure more  than 6.3Mpa~16Mpa of the hydraulic cylinder (E-cylinder). 

G-class applied to pressure more than>16Mpa~25Mpa of the hydraulic cylinders (G-cylinder).

2. Seal: 

E-cylinder use Y type polyurethane seals ring, which has simple structure and good abrasion resistance

and Y type rubber sealing ring, which is used widely; 

G-cylinder uses V type obturating ring assembly which has high temperature and reliable seal.

3. Dustproof: These hydraulic cylinders use polyurethane or nitrile rubber non-frame-type dust ring.

4. Applicable medium: hydraulic oil, mechanical oil, emulsion. It is not appled to phosphate esters. 

5. Applicable temperature: -40-120.

 

Designed For                               

Single-acting,double-acting

Stage

Single stage cylinder

Max inner tube 

170mm,180mm,195mm,200mm,210mm,etc

Mounting distance

325mm/345mm/425mm or as cutstomers’requirements

Working Pressure

7Mpa, 16Mpa, 25Mpa, Optional

Stroke

14mm-10000mm

Tipping Weight

20-68Ton

Seal Type

Parker,NOK, BUSAK SHAMBAN or as customer's requirement

Piston Rod

Chrome or nickel plated,ground & polished piston rod

Tube

High tensile cold drawn tube, precision honed for extended seal life


 

Inspection

 

1.Cylinder Tube

According to the work pressure,work temperature,work situation and other special requirements,different cylinder tube will be choosed.

1.1 Cylinder Tube:cold drawn precision seamless steel tube,hot rolled seamless steel tube,forged tube.

1.2 Tube Material: SAE1020(20#) , SAE1045(45#) ,16Mn(Q345B),27SiMn,etc.

1.3 Surface Roughness:R0.16-0.32μm

1.4 Inside Chromating:If necessary,inside tube will be chromated.

 

2.Piston Rod

2.1 Rod Material:35#,SAE1045(45#),35CrMo,42CrMo4,etc.

2.1 Technical Treatment: Quenched and tempered.1.5-1mm,or 1.03mm per millimetre.

 

3.Seal Kits

According to customers' requirements and work condition,we will choose suitable seal kits,including:Hallite,NOK,SKF,Parker,Merker,Trelleborg,China made,Taiwan made.We will supply you suitable seal kits to ensure hydraulic cylinders a long lifetime,easy maintenance and simple repairing.

 

4.Inspection and Testing

4.1 We have professional quality control department,the inspection of every step from raw material to finished product is made  in the same factory,each procedure will be tested by professional inspector.

4.2 Before hydraulic cylinder is assemblied , every spare parts would be measured and cleaned .After hydraulic cylinder is assemblied , pressure test would be carried out one by one.We ensure the testing pressure is 30%-50% higher than rated pressure in almost one hour's test.Each hydraulic cylinder must be tested without any leakage.

 

Packaging & Shipping

 

High Quality Low Price ISO Standard Hydraulic Cylinders

High Quality Low Price ISO Standard Hydraulic CylindersHigh Quality Low Price ISO Standard Hydraulic CylindersHigh Quality Low Price ISO Standard Hydraulic Cylinders

High Quality Low Price ISO Standard Hydraulic Cylinders

Company Information

 

 High Quality Low Price ISO Standard Hydraulic Cylinders

High Quality Low Price ISO Standard Hydraulic Cylinders

Our Services

 

High Quality Low Price ISO Standard Hydraulic Cylinders

 

FAQ

 

Q1:Can you provide a sample before a big order? 
A:Yes, we can .
Q

2:Are you able to make Non-standard or customized air cylinders? 
A:Yes, we can, we have our own factory, we can satisfy the customers' demands
Q3:How long is the warranty?
A:We offer 12 months warranty time.
Q4:Can I have my brand on the products?
A:Of course you can.
Q5:What is your delivery time?
A:3-5days if we have stock, 15-25days if we have no stock.
Q6:How about your quality?
A:Most of the excavator/loader/Engineering vehicle companys is our customer in China, we also have confidence to supply good products to our foreign customers.